CloudConnexa: Select and Set Internet Gateway Per User Group

Description: When you have multiple networks with an enabled internet gateway, you can assign it to a user group. This specifies which internet exit point of the networks the group uses.

To configure this routing, follow the steps below: 

1. Ensure there are two networks that have an internet gateway enabled. This provides the options for user groups to select their internet exit point.

Note: For this example, the tunnel IP addresses are 100.96.1.50 (AWS Singapore) and 100.96.1.66 (LVIV).

2. Navigate to Access → Internet.

3. Select the User Groups tab, and select Edit for the desired user group.

4. Change Internet Access to Split Tunnel Off.

5. Select the desired Networks under Internet Gateway.

6. Select Update Internet Access.

7. Verify the connection from the connected user device by checking the current public IP address in a web browser (for example, https://ipchicken.com). The browser must display the public IP address of the chosen Networks.